Heat up factor for Alluminum alloy solution heat treatment in Continuous furnace

LucySun

Dears

       Would you please kindly share how to define the heat up factor for Aluminum which is solution heat treated in continuous furnace?

Is there any relationship between the heat up factor and the furnace speed?

Thanks very much for sharing.

LucySun

Who can share any information for the heating up factor or how to define the total time in the continuous furnace when performing the solution heat treatment?

Thanks very much.

大表哥_ER7r0

u Englishgood good。           

LucySun

大表哥_ER7r0 发表于 2018-4-28 22:08
u Englishgood good。

But there isn't any feedback about this question.

Maybe I didn't make myself understood.

I think it should be right that the faster the furnace speed is, the greater the heat up factor is.

Thanks all.

我心飞翔eric

Would you like to introduce somethingmore  about the heat up factor?

lydia

Well, I'm not sure what is the heat up factor. ;

leekeychen

Is it the heating up speed?

LucySun

我心飞翔eric 发表于 2018-5-19 09:59
Would you like to introduce somethingmore  about the heat up factor?

We define the heat up dactor as: heating up time / plate thickness

(Heating up time means the time needed to reaching soaking time from the plate entring the continous furnace)

Thanks!

LucySun

我心飞翔eric 发表于 2018-5-19 09:59
Would you like to introduce somethingmore  about the heat up factor?

We define the heat up dactor as: heating up factor= heating up time / plate thickness

(Heating up time means the time needed to reaching soaking time from the plate entring the continous furnace)

Thanks!

LucySun

leekeychen 发表于 2018-7-14 15:26
Is it the heating up speed?

It seems the heating up factor is not a commen defination.

We define the heat up dactor as: heating up factor= heating up time / plate thickness

(Heating up time means the time needed to reaching soaking time from the plate entring the continous furnace)

Thanks!

LucySun

lydia 发表于 2018-5-28 14:34
Well, I'm not sure what is the heat up factor. ;

It's my fualt.

I forgot the heating up factor was not a commen defination for HT.

We define the heat up dactor as: heating up factor= heating up time / plate thickness

(Heating up time means the time needed to reaching soaking time from the plate entring the continous furnace)

Thanks!

hackyue

You shall define 'heat up factor' in your procedure.
As I know, it is not always called this name.

Then some tests are needed for the defination of heat up factor.
Of course, the different thickness and load shall also be considered.
I think you can select or define several load situations, and gather applicable heat up factors. Then define the different factors summarised through the tests.
And the operators can follow the work instrustructions.

hackyue

????????????????????

LucySun

hackyue 发表于 2018-10-17 14:31
You shall define 'heat up factor' in your procedure.
As I know, it is not always called this name.
...

Thanks so much.

Now we defined the new heat up factor based on several tests.

hackyue

LucySun 发表于 2021-4-14 16:14
Thanks so much.

Now we defined the new heat up factor based on several tests.

Glad to hear it works.